OLEXOBIT® A15E

OLEXOBIT® A15E is a polymer modified binder (PMB) that is designed for use in dense-graded asphalt to minimise permanent deformation and fatigue cracking. When used in open-graded asphalt, OLEXOBIT® A15E provides increased cohesive strength and durability.

PDF-Download-or-print.pngKey Benefits

Performance Benefits

  • Excellent resistance to rutting and fatigue in dense-graded asphalt
  • Superior cohesive strength to provide excellent resistance to abrasion
  • Enhanced durability
  • Reduced binder drainage in open-graded asphalt
  • Thick cohesive binder to reduce oxidative effects in open-graded asphalt

Application Benefits

  • Improved storage and travel stability over conventional SBS-modified binders
  • Low-fuming formula

Specification

OLEXOBIT® A15E is manufactured to comply with Austroads AGPT/T190 and ATS-3110 A15E grade.

Typical Characteristics

Property Typical Value
Softening Point, °C 94
Torsion Recovery at 25°C, % 68
Viscosity at 165°C, Pa.s 0.75
Consistency 6% at 60°C, Pa.s 1,500
Stiffness at 15°C, kPa 18
Segregation, % 0.5

Storage & Handling

The storage of bituminous binders for prolonged periods at elevated temperatures should be avoided as quality may be adversely affected. Bituminous binders should be stored at the lowest temperature that enables practical use. 

Maximum Storage Temperature Recommendations

  • Storage for up to 48 hours - 160°C - 175°C
  • Storage for up to 7 days 140°C
  • Storage for up to 14 days 140°C
  • Asphalt mixing 160°C - 175°C
  • Asphalt compaction 140°C - 160°C

Health & Safety

For a full description of hazards associated with the use of bituminous binders, please refer to the appropriate safety data sheet (SDS)

Quality Assurance

Puma Bitumen is known in the industry for consistently delivering high quality products. Our products can be relied on to perform under the most diverse and demanding road conditions in Australia. This is possible thanks to our innovative product technology, comprehensive quality assurance programmes, efficient operations and a sophisticated production processes unique to Puma – all supported by our highly skilled and experienced staff.

The Puma Energy Global Bitumen Technology Centre based in Altona, Victoria, is where we conduct industry-leading research and from Altona we provide technical expertise and support to our customers throughout Australia and across the world. Our team of technical specialists is dedicated to ensuring our products are thoroughly tested at every stage – from the selection of crude oil at the start of the production process, right through to delivery.

Our product stewardship and rigorous quality management practices reflect our commitment to delivering the highest quality products that perform on the road. Our dedication to quality is recognised by our accreditation to Australian Standard AS/NZS 9001.